Audio

EAW SB1002 Dual 18″ Subwoofer

Yamaha RIO1608-D2 16×8 Dante I/O Rack

d&b D20 Amplifier

d&b Audiotechnik D20 Amplifier 4-Channel

d&b D40 Amplifier

d&b Audiotechnik D40 Amplifier 4-Channel

d&b D80 Amplifier

d&b Audiotechnik D80 Amplifier 4-Channel

Lake Dual LM 44 Audio System Processor Rack

Yamaha TIO1608‑D 16×8 Dante I/O Rack

d&b D20 Amp Rack

d&b audiotechnik D20 Amp Rack: (3) D20 and I/O Panel

d&b D80 Amp Rack

d&b audiotechnik D80 Amp Rack: (3) D80, DS10, I/O Panel

d&b DS10 Audio network bridge

The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. Positioned within the signal chain in front of the amplifiers, this 1 RU device expands the d&b system approach in both mobile and installation environments. Each unit can deliver up to sixteen Dante network channels via AES3 digital signal outputs. The AES3 channel streams from the DS10 carry meta data with Dante channel labels and cabling information to the four channel d&b amplifiers. Additionally, four AES3 input channels provide access to the Dante audio network for applications such as a break-in from a Front of House console. The DS10 incorporates an integrated 5-port switch, offering a primary and redundant network for the Dante protocol, as well as advanced functions such as Multicast Filtering and VLAN modes. This extensive switch flexibility provides extended connectivity for a laptop to control the d&b amplifiers using the R1 Remote control software via the OCA/AES70 (Open Control Architecture) protocol. Using the DS10 Audio network bridge, audio signals and remote control data can be combined using a single Ethernet cable.

d&b M4 Monitor Wedge

The M4 is a 2-way high performance stage monitor employing an integrated 15” LF and 1.3” exit horn loaded HF coaxial driver design that utilizes neodymium magnets. The constant directivity dispersion of 50° x 70° (h x v), which this unique horn provides, delivers an accurately defined coverage area on stage. The M4 can also be operated in 2-Way Active mode. When the cabinet is used in an upright position the M4 serves as a powerful PA loudspeaker with a 70° x 50° dispersion suitable for a variety of applications. For dedicated installation applications the dispersion characteristics of the M4 driver assembly can be rotated in 45° increments. The M4 cabinet is constructed from marine plywood, which incorporates the handles, has an impact resistant paint finish, M10 threaded inserts and a socket to accept loudspeaker stands. The front of the loudspeaker cabinet is protected by a rigid metal grill backed with an acoustically transparent foam. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.

Danley TH118 Tapped Horn Subwoofer

Yamaha Dual TIO1608 I/O Stage Rack

16×8 100′ Snake on Reel

48×8 Ch. 300′ Snake w/​50′ Split — MASS W4

Akai MPC4000 Plus

AKG C1000 Condenser

AKG C1000 Cond. Microphone w/ Clip

AKG C3000 Condenser

AKG C3000 Cond. Microphone w/ Clip